Difference between revisions of "ACCESS-ESM 1.5"

m
Line 24: Line 24:
 
Default configuration, based off CSIRO ksh scripts
 
Default configuration, based off CSIRO ksh scripts
  
=== Last Interglacial ===
 
  
Main Page: [[ACCESS-ESM-LIG|ACCESS-ESM-LIG]]
+
=== PMIP4 Runs ===
 +
 
 +
Main Page: [[ACCESS-ESM-PMIP4|ACCESS-ESM-PMIP4]]
 +
 
 +
Currently contains two models from the PMIP4 setting: Last Interglacial and Mid-Holocene
 +
 
 +
==== Last Interglacial ====
  
 
Science Contacts: Nick Yeung, Laurie Menviel
 
Science Contacts: Nick Yeung, Laurie Menviel

Revision as of 19:45, 16 July 2019

Template:Stub This is a stub page and needs expansion

Payu configuration: https://github.com/coecms/esm-pre-industrial

See the README on the github page for information on how to run ACCESS-ESM with Payu

CSIRO documentation: https://access-svn.nci.org.au/trac/cmip5/wiki

 

Payu Experiments

We strongly recommend that you run ACCESS-ESM 1.5 using the payu driver. You can download the configuration by typing

$ git clone https://github.com/coecms/esm-pre-industrial.git

The website (https://github.com/coecms/esm-pre-industrial) of the configuration also contains detailed instructions on how to run the model.

Configurations

piControl

Default configuration, based off CSIRO ksh scripts


PMIP4 Runs

Main Page: ACCESS-ESM-PMIP4

Currently contains two models from the PMIP4 setting: Last Interglacial and Mid-Holocene

Last Interglacial

Science Contacts: Nick Yeung, Laurie Menviel

Note: In addition to changed MMRs for certain gases, it also needs an updated UM build with different orbital parameters. This updated UM build is at

/short/public/access-esm/payu/bin/coe/um_hg3.exe-20190412-pmip-r327

CSIRO KSH Scripts

There is some documentation on google drive, CMS > Coupled Models

 

git clone git@bitbucket.org:climate-cms/csiro-scripts.git
cd csiro-scripts/original/build
make

Turns out I needed access to the CABLE repo, see https://trac.nci.org.au/trac/cable/wiki/CableRegistration

Other than that, compile worked fine.

Running first test

copy the scripts PI-C2C-1p5r29* from the original directory to a new experiment directory.

Rename the scripts with

 

rename PI-C2C-1p5r29 test1 PI-C2C-1p5r29*

Make sure that the correct project is set in test1:

 

#PBS -P w35

Change initial date and final date in test1.init:

 

#-- Initial and Final Date of the Experiment
iniyear=1;      finalyear=1;            typeset -Z4 iniyear  finalyear
inimonth=1;     finalmonth=1;           typeset -Z2 inimonth finalmonth
iniday=1;       finalday=5;             typeset -Z2 iniday   finalday

Then run

 

qsub test1

Link the build directory to the experiment directory.

Issues

The RUNID of PI-C2C-1p5r29 was hardcoded in the script. I removed that hardcoded line and left the export RUNID=`basename $PBS_O_WORKDIR` in because the experiment directory has the same name as the scripts.

It didn't find the build directory in the experiment directory. I linked the build directory there.

The model failed asking for a restart dump that didn't exist. Deleting the test1.date file solved that.

Didn't find create_rankfile.py -- copied from original directory. (Had to delete test1.date again.)

I also pre-emptively linked the runscripts directory from original to my experiment directory.

How ACCESS works

<RUNID>

The actual sumit script does not have an extension, and is a ksh script. It sets a whole lot of environment variables, most of them exported.

It then sources, if present, runscripts/umprofile which also sets some variables, however, many of these variables don't seem to refer to a path that exists on raijin. Then, again, if present, runs runscripts/setglobalvars, again, the contents of which seem to be outdated.

It sets a few more variables, then sources <RUNID>.init.

Many more variable declarations, then it sources UMScr_Toplevel.

Finally, it sources <RUNID>.fin

<RUNID>.init

This script is *sourced* by <RUNID>, so it's still a ksh script. It begins with a function declaration, which sets certain ancillary files depending on the year.

Then come many more variables, including:

  • CMIP5RUN, which can be any of these: picontrolv,historical,pi4xCO2,pi1pcntCO2,rcp45,rcp85,rcp26.
  • nproc_ice (12 currently)
  • oce_nx and oce_ny for ocean decomposition (currently 12 and 4, respectively)
  • ntproc as the total number of cores for this job (UM_NPES + nproc_ice + (oce_nx * oce_ny))
  • iniyear, inimonth, and iniday as the initial date of the model, which is then compressed into inidate (YYYYMMDD)
  • finalyear, finalmonth, finalday as the final date of the model, compressed into finaldate.

Then it looks for <RUNID>.date:

If it doesn't exist, then it assumes that it's a new run. It creates the file and dumps the initial dates in there. If the file does exist, it reads the date out of it (only last line).

It then uses ~access/bin/calendar_more to calculate the times for this run (initial date, end date, first date of next run, et cetera).

From this, it gets, amongst other things, the days_in_run, which it then multiplies by 86,400 (secs per day) to get runtime.

Next, the script creates it work and run directories, copying files there as needed. (Apparently, for historical runs, it also needs to change the dates in the UM files, changing the reference date from the 16th of the month to the first.) This is also where it uses the function it declared at the beginning.

Finally, it makes several (currently obscure) changes to a lot of namelists, and then creates the ACCESSRUNCMD.

And it loads new modules, replacing others if they had been loaded before.

<RUNID>.fin

Check whether variable FCODE is 0 (presumably the return code of the Model run?), only then will it do anything.

It calculates the name of the restart file restartfile="aiihca.da${umdate}" where umdate has been created by datetoum or datetoum2.

Next, it moves what I think are the coupling restart files, ${cplrundir}/?2?.nc to the archive ${archivedir}/restart/cpl/$resfile-${enddate}

Then, it accesses $atmrundir: Validates the date of the restart file, moves it to ${archivedir}/restart/atm/${restartarch} ((restartarch had been set to "${RUNID}.astart-${nextdate}").

Next, it moves all UM output files (aiihca.p*) to the archive dir, renaming them in the process.

Modifications

Created a new branch: holger_testing

MOM5 Version Control

MOM5 is under version control: https://github.com/OceansAus/ACCESS-ESM1.5-MOM5.git - this was added to the Makefile.

ummodel_hg3

ummodel_hg3 was still copied from /short/p66/txz599/ACCESSHOME/submodels/UM/ummodel_hg3/. That directory itself is under version control, but with some non-checked-in.

umbase_hg3

umbase_hg3 was still copied. But there weren't any interesting changes in the directory compared the the repository. (Only fcm_env.sh and parsed_bld.cfg) So I've changed it to point to the svn repo.

bld-hadgem3-mct.cfg

The file bld-hadgem3-mct.cfg was missing from the ummodel_hg3 repo. For now, I've made it part of the access-esm repo, and added a line in the Makefile to copy it over.